184*184mm led panel light

led panel light specification Light sourceSMD low power ledLuminous Flux>580lmCCT2700-3500K,4000-5000K,5700-6300KColorWhite,Warm White,Red,Green,Blue,RGBConsumption power7WIut voltageAC100-240VColor rendering index>80RaMaterialAluminum frame edge with LGP(PMMA)WaterproofIP40Light efficiency>80%Electrical source efficiency>85%Power factor0.95Working temperature-20-+50degreeWorking voltageDC24VBeam angle85 degreeLife span>50,000hoursSize6INCH DIAMETER LIGHT AREAFrame width13mmInstallation waysbuilt-in installation, mounted installation, suspended installationOperating time(hours)Lumen decrease(%)5,0002.410,0005.220,00011.350,00024.5Advantages1 ultral thin,just 13mm thickness2 decent apperance,soft and even light3 no UV no frequent glaring,protect your eyes,no pollution,no radiation4 remote dimmer control5 long lifespan >50,000hours6 less maintenance and save energyApplicationhotels,meeting room,office,school,hospital,and so onOEM&ODMOEM&ODM is acceptable,and we can do as your requiment on your design and logo We can produce the follow LED panel light for your reference:1.Round 6 inch(Dia.199*17mm)LED ceiling light:with adapter,24V,8W, 540 lum2.Round 4 inch(Dia.144*17mm)LED ceiling light:with adapter,24V,5W,320Lum3.square 184*184 *18mm:with adapter,24V,7W, 500 lm4.square 100*100 *12mm:with adapter,24V,1W,80 lm5.600*600*13mm:with 24V,32W,2400 lm6.300*300*13mm:with 24V,16W,1200 lm7.300*1200*13mm:with 24V,34W,2300 lm8.300*600*13mm:with 24V,20W,1500 lm9.600*1200*13mm:with 24V,65W,4200lmAdvantages of LED Panel light1. Energy saving about 70%; 2. Long life span more than 5 years; 3. No infrared rays, no ultraviolet radiation, no thermal effect; 4. Ultra slim and unlimited design and various dimensions are available; 5. Soft and wide light emitting; 6. Special circuit design, avoiding the single broken LED influence problem; Installation precautions for LED panel light1.This product should be installed by trained electricians. 2.Pleas make sure the transformer and the light paneldisconnect with the AC main supply. 3.The distance between the light and any flammable materials must not be less than 0.2m. The distance between the upper part of the installed light and the ceiling must not be less than 2.0cm.The light must not be installed into ceilings or walls that contain heat-insulating material. The main cable must not connect with the low voltage cable or the panel light. Main Applications: